Fascia 6" Gutter — Sizing & Cost Guide
The fascia 6-inch gutter provides high capacity at 7,400 square feet per 1 inch per hour rainfall while maintaining the integrated fascia-gutter design. This profile is ideal for larger homes and commercial buildings that want a clean, modern roofline without visible gutter brackets. The larger size handles heavier rainfall events and steeper roof pitches, making it suitable for a wide range of climates and building sizes.
Fascia 6" Specifications
Available Materials
Maximum Roof Area by Rainfall Intensity
The table below shows the maximum effective roof area (in square feet) that the Fascia 6" gutter can drain at various rainfall intensities. The capacity of 7,400 square feet is rated at 1 inch per hour. At higher rainfall intensities, the maximum serviceable roof area decreases proportionally because more water enters the gutter per unit of roof area. Use your local rainfall intensity (available on the states page) to determine if this profile is adequate for your home.
| Rainfall Intensity | Max Effective Roof Area | Typical Home Size |
|---|---|---|
| 1 in/hr | 7,400 sq ft | Large home or commercial |
| 1.5 in/hr | 4,933 sq ft | Large home or commercial |
| 2 in/hr | 3,700 sq ft | Large home or commercial |
| 2.5 in/hr | 2,960 sq ft | Standard two-story home |
| 3 in/hr | 2,466 sq ft | Standard two-story home |
| 3.5 in/hr | 2,114 sq ft | Standard two-story home |
| 4 in/hr | 1,850 sq ft | Small to medium home |
| 4.5 in/hr | 1,644 sq ft | Small to medium home |
Cost Estimate for Fascia 6"
The cost of Fascia 6" gutters ranges from $16 to $28 per linear foot for materials. This price range reflects variations in material thickness, finish options, and regional availability. Professional installation typically adds $3 to $8 per linear foot depending on the height of the building, accessibility, and local labor rates. The table below shows estimated material costs for common gutter run lengths. Total installed cost including downspouts, hangers, end caps, and labor is typically 2 to 3 times the material cost.
| Gutter Run | Material Cost (Low) | Material Cost (High) |
|---|---|---|
| 80 ft | $1,280 | $2,240 |
| 100 ft | $1,600 | $2,800 |
| 120 ft | $1,920 | $3,360 |
| 150 ft | $2,400 | $4,200 |
| 200 ft | $3,200 | $5,600 |
| 250 ft | $4,000 | $7,000 |
| 300 ft | $4,800 | $8,400 |
fascia Profile Details
Fascia gutters integrate the gutter and fascia board into a single unit, creating the cleanest possible roofline. By eliminating the separate fascia board, this profile removes a potential entry point for water damage and creates a seamless transition from the roof edge to the soffit. Fascia gutters are popular in modern construction and are the dominant residential gutter style in Australia and the UK. Professional installation is recommended because the existing fascia must be removed and the gutter system must integrate with adjacent roofing components.
When selecting the Fascia 6" gutter for your project, consider the total effective roof area draining to the gutter system, the local rainfall intensity for your area, and the number and placement of downspouts. A general rule is to keep the capacity utilization below 75 percent of the rated maximum to provide a safety margin for storms that exceed the design intensity. For homes in areas with frequent heavy rainfall or large roof areas, upgrading to the next larger size within the same style family is a worthwhile investment that adds minimal cost but significantly reduces the risk of overflow during extreme weather events.
Proper installation is critical to gutter performance regardless of the profile selected. Gutters should be sloped toward the downspouts at a rate of approximately 1/16 inch per foot to ensure water flows to the outlets rather than pooling in the gutter. Hanger or bracket spacing should not exceed 36 inches, and many professionals recommend 24-inch spacing for durability and to prevent sagging under water and ice loads. All joints, end caps, and corners should be sealed with high-quality gutter sealant, and downspout connections should be secured with rivets and sealed to prevent leaks at the transitions.
State Compatibility for a Typical 2,000 sq ft Home
For a typical 2,000 square foot home with a 4/12 roof pitch (effective area of approximately 2,100 sq ft), the Fascia 6" gutter is adequate in 45 states and insufficient in 6 states based on the 1-hour, 10-year storm rainfall intensity. States where this profile is adequate are shown in green; states requiring a larger gutter are shown in red. For borderline cases, adding more downspouts or upgrading to the next size provides an appropriate safety margin.
Other Gutter Profiles
Compare the Fascia 6" with other gutter profiles to find the best match for your project. Each profile offers different trade-offs in capacity, appearance, cost, and material availability.