Half-Round 5" for a Very Large Home (4,000 sq ft)
This page analyzes whether the Half-Round 5" gutter (capacity 3,980 sq ft at 1 in/hr) is adequate for a very large home (4,000 sq ft) across all standard roof pitches and rainfall intensities. A very large home with approximately 4,000 square feet of roof area. Typical of executive homes, estate properties, and large custom builds. Properties of this size almost always require 6-inch or larger gutters, especially in areas with moderate to heavy rainfall. At a standard 4/12 roof pitch, the Half-Round 5" is adequate for rainfall intensities up to none of the tested intensities for this roof size. Use the comprehensive grid below to find the exact combination that matches your home's pitch and local rainfall.
Adequacy Grid: Half-Round 5" for Very Large Home (4,000 sq ft)
The grid below shows whether the Half-Round 5" gutter has sufficient capacity for a 4,000 sq ft roof at each combination of roof pitch and rainfall intensity. Green cells indicate the gutter is adequate with the percentage of capacity used. Yellow cells indicate the gutter is near capacity (over 75% used). Red cells indicate the gutter is inadequate and will overflow during the design storm. This comprehensive view helps you determine if the Half-Round 5" is the right choice for your specific conditions, or if you should consider a larger profile.
| Pitch | 1 in/hr | 1.5 in/hr | 2 in/hr | 2.5 in/hr | 3 in/hr | 3.5 in/hr | 4 in/hr | 4.5 in/hr |
|---|---|---|---|---|---|---|---|---|
| 1/12 | 102% | 152% | 203% | 254% | 305% | 355% | 406% | 457% |
| 2/12 | 103% | 154% | 205% | 256% | 308% | 359% | 410% | 461% |
| 3/12 | 104% | 155% | 207% | 259% | 311% | 362% | 414% | 466% |
| 4/12 | 106% | 158% | 211% | 264% | 317% | 369% | 422% | 475% |
| 5/12 | 109% | 163% | 217% | 271% | 326% | 380% | 434% | 488% |
| 6/12 | 113% | 169% | 225% | 281% | 338% | 394% | 450% | 507% |
| 7/12 | 117% | 175% | 233% | 291% | 350% | 408% | 466% | 525% |
| 8/12 | 121% | 181% | 241% | 302% | 362% | 422% | 482% | 543% |
| 9/12 | 126% | 188% | 251% | 314% | 377% | 440% | 503% | 565% |
| 10/12 | 131% | 196% | 261% | 327% | 392% | 457% | 523% | 588% |
| 11/12 | 137% | 205% | 273% | 342% | 410% | 478% | 547% | 615% |
| 12/12 | 142% | 213% | 283% | 354% | 425% | 496% | 567% | 638% |
Downspout Requirements
For a very large home (4,000 sq ft) with approximately 179 linear feet of gutters, the Half-Round 5" system requires the following downspout configuration:
| Metric | Value |
|---|---|
| Estimated Gutter Run | 179 ft |
| Downspouts (by run length) | 9 |
| Downspouts (by roof area) | 7 |
| Recommended Downspout Count | 9 |
| Downspout Size | 2x3 inch |
Cost Estimate for Half-Round 5" on Very Large Home (4,000 sq ft)
The estimated material cost for the Half-Round 5" gutter system on a very large home (4,000 sq ft) with approximately 179 linear feet of gutter run ranges from $1,432 to $2,685. This estimate covers the gutter material only. Professional installation typically adds $3 to $8 per linear foot depending on building height, accessibility, and local labor rates. Additional costs include downspouts ($5-$15 each), end caps ($2-$5 each), inside and outside corners ($5-$15 each), and gutter hangers ($1-$3 each, spaced every 24-36 inches). For a complete installed system on a very large home (4,000 sq ft), budget approximately $2,864 to $8,055 including all materials, hardware, and labor.
The Half-Round 5" is available in copper, aluminum, galvanized steel, zinc. Material selection affects both the cost and longevity of the system. Aluminum is the most cost-effective option for most applications, while copper offers the longest lifespan at a premium price. When comparing costs between gutter profiles, remember that a slightly more expensive gutter that prevents overflow damage is always a better investment than a cheaper option that allows water to cascade down the foundation during heavy storms.
Alternative Gutter Profiles for Very Large Home (4,000 sq ft)
Compare the Half-Round 5" with other available profiles for a very large home (4,000 sq ft) at a standard 4/12 pitch and 2.0 in/hr rainfall intensity. The table shows which profiles are adequate and their respective cost estimates for 179 linear feet.
| Profile | Capacity | Capacity Used | Adequate | Material Cost |
|---|---|---|---|---|
| Half-Round 5" (current) | 3,980 | 211.1% | No | $1,432 - $2,685 |
| Copper Half-Round 5" | 3,980 | 211.1% | No | $4,475 - $7,160 |
| Box 5" | 5,000 | 168.0% | No | $1,790 - $3,222 |
| Fascia 5" | 5,200 | 161.5% | No | $2,148 - $3,580 |
| K-Style 5" | 5,520 | 152.2% | No | $1,074 - $2,148 |
| Seamless Aluminum K-Style 5" | 5,520 | 152.2% | No | $1,432 - $2,506 |
| Half-Round 6" | 7,200 | 116.7% | No | $2,148 - $3,938 |
| Copper Half-Round 6" | 7,200 | 116.7% | No | $6,265 - $9,845 |
| Fascia 6" | 7,400 | 113.5% | No | $2,864 - $5,012 |
| Box 6" | 7,600 | 110.5% | No | $2,506 - $4,296 |
| K-Style 6" | 7,960 | 105.5% | No | $1,432 - $2,864 |
| K-Style 7" | 11,380 | 73.8% | Yes | $2,685 - $4,475 |
Other Home Sizes with Half-Round 5"
See how the Half-Round 5" performs on different home sizes. Click any link below for a detailed analysis at that roof area.
Gutter Products and Installation
Quality materials for your gutter project.
Some links above are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.